|
Post by Ben MnSGC on Jun 6, 2016 8:14:45 GMT -7
We discovered today that we only have one connector cable for our modems. Can we still fly? We were not intending to use the OCCAMS system so I was thinking that we would only need to power it. Is a pinout for the Iridium available somewhere?
|
|
|
Post by David MSGC on Jun 6, 2016 9:33:59 GMT -7
I would think it would be easier to just leave it all together and you don't have to send occams commands. Most of that fits in the 3D printed bracket and goes in the payload together. I will look for a schematic in the mean time. Maybe #Dylan or someone else will chime in before I get back.
|
|
|
Post by David MSGC on Jun 6, 2016 9:34:45 GMT -7
Might move this to the Occams category of the forum
|
|
|
Post by Dylan MSGC on Jun 6, 2016 16:23:09 GMT -7
There is documentation in the Drive under occamsdoc_04202016.docx (If I remember correctly) that covers the iridium pinout.
|
|