|
|
Post by markland on Jun 29, 2017 17:20:45 GMT -7
After updating the ground station code on the ardunio and following the installation instructions included in the new update video for the ground station, on a new computer our ground station crashes when trying to re-calibrate the accelerometer. The small window that should display the values for calibration does open but it opens as a blank window and thats when the tracker program crashes and or stops responding. We have tried uninstalling, double checking that we have all the correct files installing, tried using anaconda as in the prep document and were still unsuccessful. Does anyone have any idea what could be going wrong? Thank you for any help you can provide in advance!
|
|
|
|
Post by alphaengineer on Jun 29, 2017 17:50:54 GMT -7
Hello, I would like to know if anyone had problems with the Ground Station shuch as, the antenna points to opposite direction, the IP of the streaming raspi is not 192.168.1.3 and how to solve it??? We have followed multiple times the instructions step by step.
|
|
|
|
Post by alphaengineer on Jun 29, 2017 17:54:50 GMT -7
Hello, markland, you should put your windows PC in multi-threading, this allows Microsoft Windows to use the necesary resources of the Multi-Core processor, without it, no matter what powerful CPU you use, it will crash.
|
|
|
|
Post by markland on Jun 30, 2017 12:14:21 GMT -7
Hello, markland, you should put your windows PC in multi-threading, this allows Microsoft Windows to use the necesary resources of the Multi-Core processor, without it, no matter what powerful CPU you use, it will crash. Hi Alphaengineer, So this is running on an i7 at 4 GHz and all threads are in use. As far as I know could you please give me more detail for setting up this multi threading and if its different than what windows does standard. Mark |
|
