|
|
Post by HCC Team on Aug 8, 2017 11:38:03 GMT -7
We have been attempting to update the code. We have followed the instructions for streaming video from the raspberry pi, however when we get to the step where we attempt to login with bitvise, we get a failed connection error.
Host 192.168.1.3
Port 22
Error message:
Connection failed. FlowSocketConnector: Failed to connect to target address. Windows error 10060.
Any ideas on what to do?
|
|
|
|
Post by Skylar MSGC on Aug 8, 2017 15:53:24 GMT -7
Do you have a static ip?
|
|
|
|
Post by HCC Team on Aug 8, 2017 18:58:52 GMT -7
Not sure. How do we check?
|
|
|
|
Post by Skylar MSGC on Aug 8, 2017 19:35:19 GMT -7
|
|
|
|
Post by HCC Team on Aug 10, 2017 7:37:07 GMT -7
We created the static IP and when we ran it, it came up with a different error message:
Connection failed. FlowSocketConnector: Failed to connect to target address. Windows error 10061: No connection could be made because the target machine actively refused it.
|
|
|
|
Post by Skylar MSGC on Aug 10, 2017 9:30:52 GMT -7
What did you set your IP, subnet and possibly gateway to?
|
|
Chris-HCC(KY)
Novice Ballooner
Posts: 5 
Univerisity/Program: Hopkinsville Community College
|
Post by Chris-HCC(KY) on Aug 10, 2017 10:06:08 GMT -7
192.168.1.20 (IP)
255.255.255.0
We don't have a gateway.
We have made a little progress but now we are running into the issue of the ubiquity modems. We were able to update the payload modem but not the ground station modem.
|
|
|
|
Post by HCC Team on Aug 10, 2017 19:46:39 GMT -7
We fixed that problem but now the modems are not talking any longer. They stopped right when we tried to stream video. The SSIDs are the same and we did not change anything.
|
|
|
|
Post by psuteam on Aug 12, 2017 18:27:56 GMT -7
I'm running into the same error message in Bitvise for my RFD pi. I'm using IP 192.168.1.3 and sub net 255.255.255.0.
I was able to set up a static IP and ping my pi successfully but still can't log in to Bitvise.
|
|
|
|
Post by HCC Team on Aug 14, 2017 8:42:07 GMT -7
You might need to update your modems for you to be able connect to the pi.
|
|
|
|
Post by psuteam on Aug 16, 2017 12:55:07 GMT -7
I already did the recent modem update. Is there some other update that you're referring to?
|
|
|
|
Post by Hélio Assunção on Jan 16, 2019 21:48:25 GMT -7
I'm having an ssh bitvise problem
I am trying to access my phone through bitvise to be able to install cydia that they accidentally delete and this giving me the same error of 10061
What do I do?
|
|
|
|
Post by Skylar MSGC on Nov 14, 2019 15:48:00 GMT -7
Sorry man, this forum has been abandoned for a long time, this is only here to be archived at this point. I would look at actual jailbreaking forums for IOS instead.
|
|
