|
Post by psuteam on Aug 10, 2017 20:00:04 GMT -7
*A few other people voiced similar concerns under the thread "Streaming with ffmpeg using Python" but it seemed the posts on that thread weren't getting noticed.*
After doing all updates for the video payload, the streaming will not work when using the new python code but it does still work using the old copy/paste code.
When I type "python ffmpy_stream.py" into command prompt, it responds with this:
C:\ffmpeg\bin>python ffmpy_stream.py
Your current ffmpeg command:
ffmpeg -stimeout 3000000 -i rtsp://192.168.1.3:8554/ -c copy -f rtp_mpegts rtp://localhost:4000 -r 25 -c copy -loglevel panic -b:v 3M -f flv rtmp://media.stream.live:1935/live/rtmp://media.stream.live:1935/live/9eb4bcc2-cb0b-44df-add1-5de011794600
()
finished
Any ideas of how to debug?
THANK YOU!!
|
|
|
Post by Skylar MSGC on Aug 11, 2017 13:44:32 GMT -7
Well there is a boolean at the bottom of hte code that needs to be changed from False to True. That is probably what is going on here.
|
|
|
Post by psuteam on Aug 11, 2017 21:36:05 GMT -7
That seemed to do the trick! Thank you!!
|
|