Streaming using ffmpeg Issue

[colinrunnion]

The streaming will not come up after I place the long command "



ffmpeg -i rtsp://192.168.1.3:8554/ -c copy -f flv – | ffmpeg -f flv -i – -c copy -f rtp_mpegts rtp://localhost:4000 -c copy -f flv rtmp://media.stream.live:1935/live/[our RTMP key]

I am aware I need to place the key in the brackets and I had it working today, however now when I perform this command (after rebooting the system, computer, checking the application manager) all I get is this and it just does nothing:

C:\ffmpeg\bin>ffmpeg -i rtsp://192.168.1.3:8554/ -c copy -f flv - | ffmpeg -f flv -i - -c copy -f rtp_mpegts rtp://localhost:4000 -c copy -f flv rtmp://media.stream.live:1935/live/[OUR KEY]
ffmpeg version 3.3.3 Copyright (c) 2000-2017 the FFmpeg developers

built with gcc 7.1.0 (GCC)ffmpeg version 3.3.3

Copyright (c) 2000-2017 the FFmpeg developers configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib



built with gcc 7.1.0 (GCC) libavutil 55. 58.100 / 55. 58.100



configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib libavcodec 57. 89.100 / 57. 89.100



libavutil 55. 58.100 / 55. 58.100

libavformat 57. 71.100 / 57. 71.100 libavcodec 57. 89.100 / 57. 89.100



libavdevice 57. 6.100 / 57. 6.100 libavformat 57. 71.100 / 57. 71.100



libavfilter 6. 82.100 / 6. 82.100

libavdevice 57. 6.100 / 57. 6.100 libswscale 4. 6.100 / 4. 6.100



libswresample 2. 7.100 / 2. 7.100 libavfilter 6. 82.100 / 6. 82.100



libpostproc 54. 5.100 / 54. 5.100 libswscale 4. 6.100 / 4. 6.100



libswresample 2. 7.100 / 2. 7.100

libpostproc 54. 5.100 / 54. 5.100

[irowe]

This issue has happened to us usually when the connection between the Ubiquiti and the computer you are running the code on has problems. Make sure that the physical connection is secure, and that you have a static IP set for the port you are connected to.

[Colin Runnion (USI)]

Thanks, I will try this!